Installing a DIMM (memory)
If you add memory (RAM only) to the
HP LaserJet 1200, you can print more
complex print jobs.
To install a DIMM, follow the instructions
below:
CAUTION
Handling a DIMM chip (memory) without
wearing a grounded, antistatic device
might damage the DIMM chip.
1
Turn off the power switch (220v
models only), and unplug the printer.
2
To open the left side panel, gently
pull it out.
3
Remove the DIMM chip from the
antistatic bag it came in, grasping
the chip on the top edge.
Continued on next page.
1
2
3
EN
Installing a DIMM (memory) 247
4
Position the DIMM chip in front of the
slot located inside the I/O door. The
gold contacts should be pointing
toward the printer and the cutouts
should be at the top and bottom.
5
Carefully press the DIMM chip into
the slot, making sure that it is
straight and all the way in (A). The
cam latches, located at the top and
bottom, should rotate inward. To
snap the cam latches into place,
press the handles toward each
other (B).
4
5
248 Appendix E Memory (DIMM)
EN